An architect is helping an organization design an NSX-T Data Center solution. This information was gathered during a
workshop:
1.
There are three LUNs In the storage array.
2.
There is no additional budget to purchase any more hardware.
3.
LUN 1 usage is 90% and is configured with a high-performance profile.
4.
LUN 2 usage is 75% and is configured with a high availability profile.
5.
LUN 3 usage is 60% and is configured with a balanced performance/availability profile.
6.
A highly available NSX Management cluster is required.
7.
ECMP routing is required.
Which should the architect recommend for the organization\\’s NSX-T Datacenter environment?

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was
gathered during the assessment: There must be a performance-based SLA for East-West traffic.
Which two key performance features should the architect recommend? (Choose two.)

Which type of design includes vendor models, hostnames, IP Addresses, port connections, logical unit number sizes, and number of CPUs?

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was
gathered during the Assessment Phase:
1. Customer Is concerned with NSX Manager availability.
2.
3 cabinets/racks are available in the data center.
3.
No integration with 3rd party solution is required.
4.
There is no budget for physical equipment acquisition.
5.
The 3 cabinets/racks do not share the same L2 domain.
Which three should the architect include in their design to address the customer\\’s concern with NSX Manager
availability? (Choose three.)

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information
was gathered by the architect during the Discover Task of the Engagement Lifecycle:
1.
Existing hardware will be used In any design proposal.
2.
Network bandwidth cannot be expanded.
Which concept of the Discover Task do these items belong to?

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. During discussions
about Centralized Services NAT running on Tier-1 or Tier-0 LR the customer made these requests:
1.
Services contain stateful services.
2.
Services should be in high availability mode.
Which two should the architect include in their design? (Choose two.)

Which is associated with the Discover Task of the Engagement Lifecycle?

What would an architect recommend to a customer that wants to extend management to an additional data center
through Layer 2, but does not want to add additional NSX-T licensing?

Which three must be taken into consideration when creating a Logical Design for a planned migration? (Choose three.)

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was
gathered during the Assessment Phase:
1.
There Isn\\’t much budget available for a new off-shore site.
2.
The new site is decentralized and no communication with the main data center is required.
3.
The design will need to cater to availability, upgrades, and failure scenarios.
Which three should the architect recommend In their design? (Choose three.)

According to the Discover Task of the Engagement Lifecycle, which statement would be classified as a risk?

Refer to the exhibits.
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. The conceptual design includes these requirements, assumptions, constraints, and risks:
1.
Critical applications must run across sites without changing the IP addresses.
2.
Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
3.
RTO/RPO must be reduced for the recovery of applications on the secondary site.
4.
IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer?

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
1.
This information was gathered during a workshop:
2.
Some workloads should be moved to a Cloud Provider.
3.
Extend network\\’s VLAN or VNI across sites on the same broadcast domain.
4.
Enable VM mobility use cases such as migration and disaster recovery without IP address changes.
5.
Support 1500 byte MTU between sites.
Which should the architect include in their design?