Where can you download the latest Cisco ICND1 100-105 dumps pdf files? The best useful Cisco ICND1 100-105 dumps pdf practice questions and answers free download from lead4pass. Latest Cisco ICND1 100-105 dumps exam materials and vce youtube demo update free shared. “Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)” is the name of Cisco ICND1 https://www.lead4pass.com/100-105.html exam dumps which covers all the knowledge points of the real Cisco exam. High quality Cisco ICND1 100-105 dumps pdf training resources and study guides free update, pass Cisco 100-105 exam test easily at first try.
The best Cisco 100-105 dumps pdf materials free download: https://drive.google.com/open?id=0B_7qiYkH83VReEJYRlhNVjdGeVU
The best Cisco 300-101 dumps pdf materials free download: https://drive.google.com/open?id=0B_7qiYkH83VRWFlVNGtTZjU1MVE
QUESTION 1
Which of the following describe the process identifier that is used to run OSPF on a router? (Choose two)
A. It is locally significant.
B. It is globally significant.
C. It is needed to identify a unique instance of an OSPF database.
D. It is an optional parameter required only if multiple OSPF processes are running on the router.
E. All routers in the same OSPF area must have the same process ID if they are to exchange routing information.
Correct Answer: AC
Explanation:
They are locally significant only, and have no bearing on the structure of any OSPF packet or LSA update.
QUESTION 2
Which address type does a switch use to make selective forwarding decisions?
A. Source IP address
B. Destination IP address
C. Source and destination IP address
D. Source MAC address
E. Destination MAC address
Correct Answer: E
Explanation:
Switches analyze the destination MAC to make its forwarding decision since it is a layer 2 device. Routers use the destination IP address to make forwarding decisions.
QUESTION 3
Which three statements are true about the operation of a full-duplex Ethernet network? (Choose three.)
A. There are no collisions in full-duplex mode.
B. A dedicated switch port is required for each full-duplex node.
C. Ethernet hub ports are preconfigured for full-duplex mode.
D. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.
E. The host network card and the switch port must be capable of operating in full-duplex mode.
Correct Answer: ABE
Explanation:
Half-duplex Ethernet is defined in the original 802.3 Ethernet and Cisco says you only use one wire pair with a digital signal running in both directions on the wire. 100-105 dumps
QUESTION 4
What command sequence will configure a router to run OSPF and add network 10.1.1.0 /24 to area 0?
A. router ospf area 0 network 10.1.1.0 255.255.255.0 area 0
B. router ospf network 10.1.1.0 0.0.0.255
C. router ospf 1 network 10.1.1.0 0.0.0.255 area 0
D. router ospf area 0 network 10.1.1.0 0.0.0.255 area 0
E. router ospf network 10.1.1.0 255.255.255.0 area 0
F. router ospf 1 network 10.1.1.0 0.0.0.255
Correct Answer: C
Explanation:
Enabling OSPFSUMMARY STEPS
1.enable
2.configureterminal
3.router ospfprocess-id
4.networkip-addresswildcard-maskareaarea-id
5.end
DETAILED STEPS
Comm
QUESTION 5
Which two VLANs are reserved for system use only? (Choose two)
A. 1
B. 4095
C. 4096
D. 0
E. 1001
Correct Answer: BD
Explanation:
The VLANs 0 and 4095 are reserved by the IEEE 802.1Q standard and you cannot create, delete, or modify them so they are the correct answers.
Note:
+
QUESTION 6
A company has placed a networked PC in a lobby so guests can have access to the corporate directory.
A security concern is that someone will disconnect the directory PC and re-connect their laptop computer and have access to the corporate network. For the port servicing the lobby, which three configuration steps should be performed on the switch to prevent this? (Choose three.)
A. Enable port security.
B. Create the port as a trunk port.
C. Create the port as an access port.
D. Create the port as a protected port.
E. Set the port security aging time to 0.
F. Statically assign the MAC address to the address table.
G. Configure the switch to discover new MAC addresses after a set time of inactivity.
Correct Answer: ACF
Explanation:
If port security is enabled and the port is only designated as access port, and finally static MAC address is assigned, it ensures that even if a physical connection is done by taking out the dire. 100-105 dumps
QUESTION 7
Refer to the exhibit.
The network is converged.After link-state advertisements are received from Router_A, what information will Router_E contain in its routing table for the subnets 208.149.23.64 and 208.149.23.96?
A. 208.149.23.64[110/13] via 190.173.23.10, 00:00:07, FastEthemet0/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, FastEthemet0/0
B. 208.149.23.64[110/1] via 190.172.23.10, 00:00:07, Serial1/0 208.149.23.96[110/3] via 190.173.23.10, 00:00:16, FastEthemet0/0
C. 208.149.23.64[110/13] via 190.173.23.10, 00:00:07, Serial1/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, Serial1/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, FastEthemet0/0
D. 208.149.23.64[110/3] via 190.172.23.10, 00:00:07, Serial1/0 208.149.23.96[110/3] via 190.173.23.10, 00:00:16, Serial1/0
Correct Answer: A
Explanation:
Router_E learns two subnets subnets 208.149.23.64 and 208.149.23.96 via Router_A through FastEthernet interface.
The interface cost is calculated with the formula 108 / Bandwidth.
QUESTION 8
Refer to the exhibit.
The MAC address table is shown in its entirety. The Ethernet frame that is shown arrives at the switch.
What two operations will the switch perform when it receives this frame? (Choose two.)
A. The switch will not forward a frame with this destination MAC address.
B. The MAC address of 0000.00aa.aaaa will be added to the MAC Address Table.
C. The MAC address of ffff.ffff.ffff will be added to the MAC address table.
D. The frame will be forwarded out of all the active switch ports except for port fa0/0.
E. The frame will be forwarded out of fa0/0 and fa0/1 only.
F. The frame will be forwarded out of all the ports on the switch.
Correct Answer: BD
Explanation:
If the switch already has the MAC address in its table for the destination, it will forward the frame directly to the destination port.
QUESTION 9
Which protocol uses a connection-oriented service to deliver files between end systems?
A. TFTP
B. DNS
C. FTP
D. SNMP
E. RIP
Correct Answer: C
Explanation:
TCP is an example of a connection-oriented protocol. It requires a logical connection to be established between the two processes before data is exchanged.
QUESTION 10
The network administrator is using a Windows PC application that is called putty.exe for remote communication to a switch for network troubleshooting. Which two protocols could be used during this communication? 100-105 dumps (Choose two.)
A. SNMP
B. HTTP
C. Telnet
D. RMON
E. SSH
Correct Answer: CE
Explanation:
PuTTY is a free implementation of Telnet and SSH for Windows and Unix platforms, and is used to connect to Cisco and other networking devices using SSH or Telnet.
QUESTION 11
Refer to the exhibit.
Which two statements are true about the loopback address that is configured on RouterB? (Choose two.)
A. It ensures that data will be forwarded by RouterB.
B. It provides stability for the OSPF process on RouterB.
C. It specifies that the router ID for RouterB should be 10.0.0.1.
D. It decreases the metric for routes that are advertised from RouterB.
E. It indicates that RouterB should be elected the DR for the LAN.
Correct Answer: BC
Explanation:
A loopback interface never comes down even if the link is broken so it provides stability for the OSPF process (for example we use that loopback interface as the router-id) – The router-ID is chose.
QUESTION 12
An administrator is in the process of changing the configuration of a router. What command will allow the administrator to check the changes that have been made prior to saving the new configuration?
A. Router# show startup-config
B. Router# show current-config
C. Router# show running-config
D. Router# show memory
E. Router# show flash
F. Router# show processes
Correct Answer: C
Explanation:
This command followed by the appropriate parameter will show the running config hence the admin will be able to see what changes have been made, and then they can be saved.
QUESTION 13
What two things does a router do when it forwards a packet? (Choose two.)
A. switches the packet to the appropriate outgoing interfaces
B. computes the destination host address
C. determines the next hop on the path
D. updates the destination IP address
E. forwards ARP requests
Correct Answer: AC
Explanation:
A primary function of a router is to forward packets toward their destination. This is accomplished by using a switching function, which is the process used by a router to accept a packet on one in.
QUESTION 14
What is the purpose of flow control? 100-105 dumps
A. To ensure data is retransmitted if an acknowledgement is not received.
B. To reassemble segments in the correct order at the destination device.
C. To provide a means for the receiver to govern the amount of data sent by the sender.
D. To regulate the size of each segment.
Correct Answer: C
Explanation:
Flow control is the management of data flow between computers or devices or between nodes in a network so that the data can be handled at an efficient pace.
QUESTION 15
Which statements are true regarding ICMP packets? (Choose two.)
A. They acknowledge receipt of TCP segments.
B. They guarantee datagram delivery.
C. TRACERT uses ICMP packets.
D. They are encapsulated within IP datagrams.
E. They are encapsulated within UDP datagrams.
Correct Answer: CD
Explanation:
Ping may be used to find out whether the local machines are connected to the network or whether a remote site is reachable.
Update latest Cisco ICND1 100-105 dumps exam practice materials in PDF format free download from lead4pass. Helpful newest Cisco ICND1 https://www.lead4pass.com/100-105.html dumps pdf training resources which are the best for clearing 100-105 exam test, and to get certified by Cisco ICND1, download one of the many PDF readers that are available for free.
Latest Cisco ICND1 100-105 dumps vce youtube: https://youtu.be/trVHfqmuVvg